Use this on your Water Master and it might last forever. Provides additional UV protection on any PVC inflatable. 8oz spray bottle

airCap HR is a solar-powered, high-accuracy pressure gauge which is compatible with the Halkey-Roberts New Short valves used in Water Master Rafts. The airCap HR has an over-pressure alarm that the user can turn on or off and set to any value between 0.5 and 20 psi. Efficient, solar-powered, battery free, long-life operation Performs in […]

The ultra-strong, hot-forged NRS Atomic Aluminum Oarlock combines state-of-the-art technology with time-tested design. Pound for pound, this is the lightest, toughest oarlock out there. Replacement for the Water Master Bruin with Sawyer Utility Oars.

Allows you to quickly convert your Water Master Raft to a standard raft with a bottom. The raft bottom will allow you to stand in your raft, and enables the raft to move much more quickly over the surface of the water. When used in conjunction with the Anchor / Motor Mount, your Water Master is very similar to a small fishing pram, and is extremely effective on still waters. The floor is also very effective for running rivers but will eliminate your ability to control your drift with your feet. To install, simply place your deflated Water Master inside the removable bottom and inflate your raft.

These are built to order so please allow two to four weeks for shipping.

Allows you to quickly convert your Water Master Raft to a standard raft with a bottom. The raft bottom will allow you to stand in your raft, and enables the raft to move much more quickly over the surface of the water. When used in conjunction with the Anchor / Motor Mount, your Water Master is very similar to a small fishing pram, and is extremely effective on still waters. The floor is also very effective for running rivers but will eliminate your ability to control your drift with your feet. To install, simply place your deflated Water Master inside the removable bottom and inflate your raft.

These are built to order so please allow two to four weeks for shipping.

A comfortable handle that attaches to the d-rings on either end of your Water Master. Great for pulling your Water Master ashore or getting a friend to help you carry your boat loaded with gear.

Durable, rubberized mesh bag can be attached to any D-ring on your Water Master and can be used to keep your catch fresh or your drinks cold.

12-volt pump comes with a HR valve adaptor that works with your Water Master raft. Inlayed rubber insulates from heat and provides a secure grip. Runs directly off your car battery. Pump also includes a Big Sky Inflatables dry bag to keep your investment safe.

This is a great accessory for those that love to carry gear and lots of it. It fits over the deck area behind you and keeps gear from going overboard. It comes with two d-ring patches and glue that are easily mounted onto your Water Master. Buy this accessory when you purchase a new Water Master and we will mount these for free!

This is a great accessory for those that love to carry gear and lots of it. It fits over the deck area behind you and keeps gear from going overboard. It comes with two d-ring patches and glue that are easily mounted onto your Water Master. Buy this accessory when you purchase a new Water Master and we will mount these for free!

No more scrambling to put your drink in a safe spot during some unexpected maneuvering in your Bruin. The NRS ClampIT™ Drink Holder attaches securely to any crossbar and has a lid with a hook-and-loop closure.

-The drink holder "coozie" is attached to the frame with the included innovative ClampIT Accessory Attachment

-Slide the drink holder's plastic clip easily into the groove on the ClampIT for a secure place to store your favorite beverage

-The ClampIT snaps tight on our 1 5/8" diameter frame pipe and is easily removed with the flip of the lever

-Heavy-duty, insulated nylon coozie protects your drink while keeping it cool

-The insulated lid has a hook-and-loop tab that will keep your drink in place no matter how rough the water

-A mesh bottom allows liquid to drain out freely and makes cleaning a snap

BSI Heavy duty compression straps are made from our waterproof 30oz PVC that won’t fray nor degrade over time like traditional nylon webbing.  We do not use stitching. Instead we RF weld the heavy duty cam buckle to the strap.  1, 2, 3, 4, 6, 9, 12, 15, and 20-foot lengths available. All straps are 1" wide.

Water Master heavy duty oars are built to hold up in bigger water. Made of a thicker aluminum tubing than our standard oars along with a longer and stronger connection point. Feature longer, narrower blades that allows you to submerge more blade in shallow water and a padded grip. Oars are priced/sold individually!

Add a D-ring to your Water Master for extra tie downs. Does not include glue. We recommend 1oz. of glue per D-ring patch.